eMPDFPr_Default |
=0: Default encoding mode (choose best internal representation). Input data is analyzed and text, numeric or binary compaction mode will be used accordingly (to produce the smallest symbol).
|
eMPDFPr_EAN128 |
=1: UCC/EAN/GS1-128 Emulation. Transmit ]C1 or ]L3, Use compaction for AI "01" + 14 digits
|
eMPDFPr_C128Std |
=2: Code128 Emulation. Transmit ]C2 or ]L4
|
eMPDFPr_C128FNC2 |
=3: Code128 FNC2 Emulation. Code-128 with FNC2 on first position will be emulated
|
eMPDFPr_EAN128Lk |
=4: Linked UCC/EAN/GS1-128 emulation.
Transmit ]C1 or ]L3. Indicates that the MicroPDF symbol is linked with a linear symbol (which may be required for a successful scan). Using this mode, the following AIs in the given order can be encoded with better compaction:
- date (AI 11, 13, 15 or 17) + lot number (AI 10) + other AIs (optional)
- date (AI 11, 13, 15 or 17) + serial number (AI 21) + other AIs (optional).
- date (AI 11, 13, 15 or 17) + other AIs (optional) Note: This mode is not used with UCC.EAN Composite Symbology, which uses linked symbols, too
|
eMPDFPr_05Macro |
=5: 05 Macro. The preamble [ ( > RS 0 5 GS precedes the encoded data.
|
eMPDFPr_06Macro |
=6: 06 Macro. The preamble [ ( > RS 0 6 GS precedes the encoded data.
|
eMPDFPr_CCA |
=7: CC-A Data Mode. For special applications only: use Base-928 compaction, process input data as Byte array
|
eMPDFPr_CCB |
=8: CC-B Data Mode. For special applications only: use binary compaction (Base-900), prefix symbol data with reserved symbology code word
|